If your device is not listed below, please read the general setup instructions.

Motorola Q9c & Q9h (built-in GPS receiver)
Samsung BlackJack II (built-in GPS receiver)

Method 1. GID (recommended)

Launch GPS Utilities, open "Menu/GPS Setup".

1. Select "GID"
2. Press OK

Start GPS from "Menu/Start GPS".

Method 2. COM/GPD

----- WM5 -----

Install Microsoft GPSID Configuration Utility (or enter 'http://www.efficasoft.com/download/GPSID_Settings.cab' in your device web browser), then

1. Open 'Start/GPSID Settings'.
2. Set the 'Program Port' to COM3~5 or GPD1~9, 'Hardware Port' to NONE.
3. Set the 'Baud Rate' to 9600 and tick 'Manage Automatically'.

Launch GPS Utilities

1. Open 'Menu/GPS Setup'.
2. Select 'COM/GPD' and set the above Program Port & Baud Rate information.
3. Press "Done" and you are ready to 'Start GPS'.

----- WM6/WM6.1 -----

Download "GPSID Settings" and copy Settings.exe to your phone. Launch File Manager, locate Settings.exe and execute it. Then in the opened setting window

1. Set the 'Program Port' to COM3~5 or GPD1~9, 'Hardware Port' to NONE.
2. Set the 'Baud Rate' to 9600 and tick 'Manage Automatically'.

Launch GPS Utilities

1. Open 'Menu/GPS Setup'.
2. Select 'COM/GPD' and set the above Program Port & Baud Rate information.
3. Press "Done" and you are ready to 'Start GPS'.

Motorola Q

1. Follow the steps in the Motorola Q User Guide, section "Turning Bluetooth On/Off/Discoverable" to turn on the Bluetooth and pair up the GPS receiver with your phone.
2. Launch GPS Utilities.
3. Open "Menu/GPS Setup".
4. Select "COM/GPD".
5. Set COM1 and Baud rate (check the rate in your GPS receiver user manual).
6. Press Done.
7. Start GPS from "Menu/Start GPS".
8. Select the paired GPS receiver from prompted "Select a bluetooth device" dialog and the connection is established.